Micronics PCI/ISA System Board D6-IN Bedienungsanleitung PDF herunterladen (Seite 49)

M6DPi System Board Manual

Chapter 4: The BIOS Setup Utility

Standby Time-out

The Standby Time-out selection sets the amount of time

that elapses for the system to enter Standby Mode.

Standby Mode turns off various devices in the system,

including the display screen, until you start using the

system again. The options are Off (default), 1 min., 2

min., 4 min., 6 min., 8 min., 12 min. or 16 min.

Auto Suspend Time-out

The Standby Time-out selection sets the amount of time

that elapses for the system to enter Suspend Mode. The

options are Off (default), 5 min., 10 min., 15 min., 20

min., 30 min., 40 min. or 60 min. Before making changes,

"Customized" must be selected in the Power Manage-

ment Mode selection.

Hard Disk Time-out

This selection sets the amount of time that elapses before

the IDE drive enters spin-down mode to conserve power.

The options are Disabled (default), 2 min., 4 min., 6

min., or 8 min., 10 min. and 15 min. Before making

changes, "Customized" must be selected in the Power

Management Mode selection. NOTE: Do not enable this

selection unless your IDE drive supports spin-down mode.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 80 81

Keine Kommentare

Micronics PCI/ISA System Board D6-IN Bedienungsanleitung Seite 49