Micronics PCI/ISA System Board D6-IN Bedienungsanleitung PDF herunterladen (Seite 27)

M6DPi System Board Manual

Chapter 3: Installing the M6DPi

Installing the DIMMs

The M6DPi uses DIMM modules for the main memory.

To install the DIMMs, locate the memory banks on the

system board and follow the steps below:

1. Hold the DIMM so that the notched edge is aligned

with the notch on the DIMM socket (Figure 3-1).

2. Insert the DIMM at a 90 degree angle.

3. Gently push the DIMM straight down until it locks

into place (past the release tabs).

Figure 3-1: Installing a 168-Pin DIMM

Removing DIMMs

To remove DIMMs, follow the steps below:

1. With both thumbs (or fingers), press the release tabs

away from the socket.

2. With the DIMM free from the release tabs, lift the

module up and place in an anti-static bag or package.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 80 81

Keine Kommentare

Micronics PCI/ISA System Board D6-IN Bedienungsanleitung Seite 27