Micronics PCI/ISA System Board D6-IN Bedienungsanleitung PDF herunterladen (Seite 27)

4-4

Micronics M6Pi System Board Manual

up and down arrows<↑/↓> to highlight the System Date and follow the same

procedure used to set the time.

Diskette A or B

To configure a floppy drive added to or removed from your computer, use the

up and down arrow keys <↑/↓> to select the desired drive. Use the <+/-> keys

to change the setting until it matches the floppy drive you installed. The BIOS

supports 2.88MB, 1.44MB, 1.2MB, 720KB, and 360KB floppy drives.

IDE Adapters (Hard Disk Setup)

If you are setting up a SCSI hard disk, select None in the IDE Device param-

eters (see your SCSI card manual for more details).

To install an IDE device, select the device to configure and press <Enter>. An

IDE Device submenu will appear. (Figure 4-3).

Figure 4-3 IDE Device Submenu

Autotype Fixed Disk

The easiest way to set your IDE devices is to let the BIOS do it for you. When

the IDE Device submenu first appears, the Autotype Fixed Disk selection is

highlighted. Simply press <Enter>, and the remaining information is entered

automatically.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 50 51

Keine Kommentare

Micronics PCI/ISA System Board D6-IN Bedienungsanleitung Seite 27